PRODUCTS - DISPLAYS

RECLINE Rack Mounted Display Unit

RECLINE Rack Mounted Display Unit

We give you another world first from KSG Sensors, the Rack Mounted Display Unit (RMD).

Main Features:

  • 4 inputs for both single or dual axis sensors
  • 6 modes of laser operation
  • 4 daylight viewable TFT touch screens
  • User definable limit alarms on each input
  • XLR3, XLR5 and RJ45 etherCON all fitted at standard
  • Display Unit Battery Charging Output
  • Sensor Calibrator
  • Worldwide Power Supply
  • Fully functional Remote Display
  • Custom Splash Screen Logo Upload

The RMD is a our all singing, all dancing rack mountable line array inclinometer display.  The RMD manages to pack more features into it than any of our previous displays, delivering more functionality and usability than before. 

Multiple inputs for multiple sensors 

View the angle and control the lasers of each of your speaker arrays from one compact device.  As the shows and tours get larger and more complex, so too do the speaker systems.  These days it is common place to see 3 or 4 arrays per side in an arena or stadium tour and with the increased work load comes less time to fine tune to your sound system.  Luckily here at KSG, we have developed the latest tools to save you a bit of time, hopefully allowing you to spend a bit more of it in catering or on the bus with your feet up.  

RECLINE Dual Input Display Unit

RECLINE Dual Input Display Unit

Main Features:

  • 2 Inputs
  • 0.05 % Accuracy
  • 5 modes of laser operation
  • Daylight viewable TFT touch screen
  • XLR3, XLR5 or RJ45 etherCON 
  • Internal Rechargeable NiMH Battery
  • Worldwide External Power Supply included
  • Increased weather resistance
  • Custom Splash Screen Logo Upload
  • Rugged Tour Proof Aluminium Enclosure

Twice the Power

You said and we listened.  The RECLINE Remote Inclinometer System is now complimented with the Dual Input Display unit.  Previous customers have been asking about a Dual Input Display, so we put our heads together and came up with this.  

The Dual Input Display unit is capable of displaying data from two RECLINE Inclinometer Sensors.  Data is transmitted via either a 5 pin XLR or a CAT5e cable from the inclinometer sensor to the Dual Input Display unit.  The angle or incline measured is then shown on the 2.5" colour TFT touch screen.  As well as viewing two measurements, you can also activate two lasers (VRI) as well.  

The laser controls have now been extended to include 5 differentmodes of operation!

  • Momentary
  • Latching
  • Timed - 30 seconds
  • Timed - 60 seconds
  • Flashing

These modes of operation greatly increase the usability of the unit and they can also increase battery life.  Speaking of battery life, an auto shut off feature is also included, which can be bypassed if need be.  

This latest specification now includes a built in rechargeable battery and battery charger!  No longer do you have to go in search of batteries to power the system.  Keeping in line with the previous display unit, we have included a low battery indicator, external DC input and of course the external DC power supply as well. 

All sensor data and power is transmitted via XLR5 or RJ45 etherCON 

If you have one of our Peli-Cases with custom foam in lays, there is no need to worry about having acquire another case as the Dual Input Display unit will fit directly into the same space as the Single Input Display Unit.

As an added bonus, we can load your company name and logo on to the screen as a customisation option at no extra charge.

RECLINE Single Input Display Unit

Single Input Display Unit Mk 3

Main Features:

  • 1 Input
  • 0.05 % Accuracy
  • 5 modes of laser operation
  • Daylight viewable TFT touch screen
  • XLR3, XLR5 or RJ45 etherCON 
  • Limit of Range Alarm
  • Internal Rechargeable NiMH Battery
  • Worldwide External Power Supply included
  • Increased weather resistance
  • Custom Splash Screen Logo Upload
  • Rugged Tour Proof Aluminium Enclosure

The basis of any good measurement system is a clear display, showing all the information that you need to know.  The RECLINE Single Input Display does just that.  

The Display unit contains a 2.4'' colour TFT touch screen that accurately displays the angle that is currently measured, an illuminated Power switch and  an illuminated Laser power switch

As with the Dual Input Display Unit, the laser controls have now been extended to include 5 different modes of operation!

  • Momentary
  • Latching
  • Timed - 30 seconds
  • Timed - 60 seconds
  • Flashing

These modes of operation greatly increase the usability of the unit and they can also increase battery life.  Speaking of battery life, an auto shut off feature is also included, which can be bypassed if need be.  

This latest specification now includes a built in rechargeable battery and battery charger!  No longer do you have to go in search of batteries to power the system.  Keeping in line with the previous display unit, we have included a low battery indicator, external DC input and of course the external DC power supply as well. 

Data and power is received and transmitted via a 5 pin XLR.  RJ45 etherCON connectors are also available when ordering.

This display replaces the previous version of the Single Input Display (the one with the back lit LCD screen)

If one input is not enough, then check out the Dual Input Display Unit !

RECLINE Single Input Display /Calibrator

RECLINE Single Input Display Calibrator

Main Features:

  • 1 Input
  • 0.1% Accuracy
  • Integrated Sensor Calibrator
  • Backlit LCD Screen
  • XLR3, XLR5 or RJ45 etherCON connector
  • Very cost effective display
  • Simple to use Interface
  • Increased weather resistance
  • Rugged Tour Proof Aluminium Enclosure

Quality at a competitive price

The Single Input Display / Calibrator (as it it known by its full name) or Calibrator for short is an extremely economical display that can be used both as a display unit and a sensor calibrator.

With its simple user interface, any user can calibrate any of our sensors in no time at all.  A bright backlit LCD allows you to see all that is going on and industry standard Neutrik connectors ensure that every connection is made properly. 

With 6 x AA batteries and an auto power off feature, the battery life has been greatly extended. 

Connector options: XLR3, XLR5 and RJ45 etherCON

RECLINE Single Input Display Unit Mk2

RECLINE Single Input Display Unit

NOTE: This product has been discontinued and has been replaced by the Mark 3 Single Input Display.

The RECLINE Inclinometer Display unit is a portable display / power supply for the RECLINE Sensor unit.

The Display unit contains a back lit LCD screen for reading the angle of the plane that is currently measured, an Power On/Off switch, a Laser power switch and a Low Battery indicator.

The Display unit requires two (2) x 9v PP3 batteries. Industrial Lithium batteries are preferred for optimal performance but an external DC PSU is also supplied.

Data and power is received and transmitted via a 5 pin XLR.  CAT5 connectors are also available when ordering.

If one input is not enough, then check out the Dual Input Display Unit !!